Get Started — Assembly Guide
Everything you need to install your Movana Climbing Frame safely and confidently
Watch the step-by-step installation
-
Suitable for ages 2–10
-
Max load 60 kg — built to last
-
Non-toxic birch plywood
-
Installs into standard Australian timber stud walls
-
Most families install in under 2 hours
Everything You Need to Install With Confidence
Safe, simple and built for Australian homes.
- Suitable for ages 2–10 years
- Max load 60 kg / 132 lbs
- Non-toxic birch plywood, child-safe finish
- Adult assembly required
- Always supervise children during use
- Do not use if any part is cracked or damaged
- 3 Ă— Climbing Panel Sections
- 2 Ă— Triangle Side Panels (Left & Right)
- 2 Ă— Gymnastics Rings + Suspension Ropes
- All screws, sleeves & screwdriver included
- Full 12-step assembly manual included
- Fixes into standard Australian timber stud walls
- Pre-drilled panels — no measuring needed
- Hammer, drill & stud finder all you need
- Most families complete in under 2 hours
- Check all fixings monthly for safety
- Need help? Email hi@movanakids.com
Combining Panels? A Note on Aussie Walls
Setting up a Growth (6-panel) or Ultimate (9-panel) layout? Here's what to know before you drill:
- Aussie wall studs are usually spaced 45–60cm apart, so across a wider wall, some panels may land between studs with nothing to screw into
- Fix: mount a plywood board across the studs first, then attach your panels to that board instead of the wall, you can space panels exactly where you want
- The board isn't included — grab one from a hardware store like Bunnings
- Not sure about your wall type? Get a professional to check before you drill